Switched Shunt Model: MSR1

Following checks and corrections are applied during Validation and AutoCorrection.
- If Vmax1 < Vmin1 then swap the values
- If Vmax2 < Vmin2 then swap the values
Mult represents the user-specified value Minimum time constant size as multiple of time step option on the Validation page of the Transient Stability Dialog
TimeStep represents the integration time step being used as described on TimeStep
Model Equations and/or Block Diagrams
Parameters:
Tin1 | Time 1 for Switching in (sec.) |
Vmax1 | Voltage upper limit 1 (p.u.) |
Tout1 | Time 1 for Switching out (sec.) |
Vmin1 | Voltage lower limit 1 (p.u.) |
Tin2 | Time 2 for Switching in (sec.) |
Vmax2 | Voltage upper limit 2 (p.u.) |
Tout2 | Time 2 for Switching out (sec.) |
Vmin2 | Voltage lower limit 2 (p.u.) |